How to measure inseam? | A clothing measurement guide for men, women, and kids

0
how to measure inseam length on body
Source: Youtube

Have you had enough of online shopping for clothes that do not fit you perfectly? Well! Anyone can doubt their fashion choices when they are unaware of ways for how to measure inseam.

What is the inseam length?

To begin with, inseam length refers to the length of any clothing wear from top thigh to ankles – for bottom wear. Apart from this, for the upper body, the inseam length is the length (in inches) measured from chest-starting under the arm to the shoulder blades.

However, the term “inseam” is authentically and commonly used to measure the length of the body (in inches) from the crotch area to the bottom of the pants or ankles. Inseam measurement for both men and women should be done carefully. The reason being, peerless inseam measurement can ruin your outlook. The wrong inseam does not allow your outfit to deliver the appearance that one anticipates during online shopping.

how to measure inseam
Source: Mavi Jeans Blog

Why is the inseam important?In the event that you are wondering whether the inseam has any impact on sizes. The answer is no. The inseam has nothing to do with size. However, the inseam decides the actual fit of the bottom wear (like jeans). For example, you want jeans with ankle length. But jean’s inseam is longer than your inseam length on the body. It will be unfit. As a consequence, it will not deliver the outlook that had attracted you to make a purchase in the first place. Therefore, it is recommendable to learn how to measure inseam length in order to make definite choices.

Today, you will get to learn how to measure inseam at home in the most flexible ways. This guide is a helpful irrespective of gender. In this reading, you will find out how to measure inseam on the body? So, are you thrilled to refashion your wardrobe with proper-fitting clothes? Let’s begin:

How to measure inseam length for women?

 Method 1: Self-measurement

For this method, you must take a jeans or trouser that fits you perfectly by figure. Meaning, it looks best on you. It is recommendable to choose a trouser similar to the one that you desire to purchase. The same notion goes for if you are purchasing a pair of jeans online without a trial.

  • To begin with, fold your pants vertically (one time). This way, both leg-sides will be singled.
  • Line up the pants or trousers on a straight surface like a table or an iron chair.
  • Now, lift the one-side leg of jeans up to the crotch.
  • Further, take a measuring tape.
  • Affix it using a thumb on the crotch end.
  • Run it down to the ankle or bottom of the pants.
  • Note the inseam length (for example, 72 cms. Meaning, 28.34 inches).

Extra measures while applying how to measure inseam length? Method:

  • Add up to 1 inch, presuming that you will wear heels with pants.
  • Add up to 1.3 cm or 0.5 inches on the condition that the trousers or pant’s fabric is shrinkable.

Method 2: How to measure someone’s inseam?

In the event that you are required to measure inseam for someone else. Or, someone else is measuring your inseam, the following guide will be helpful:

  • Wear a pair of jeans that tend to give you a perfect shape and feel comfortable (especially from the crotch area).
  •  Get rid of elements that somehow affect your actual height, such as heels, sneakers, and sports shoes.
  • Now, stand straight against a wall. Put both your feet together.
  • Further, run down the measurement tape from the crotch end to the ankles.
  • Note down the inseam length. 

How to measure an accurate inseam length?

While measuring someone’s inseam length on the body, the intended individual’s body posture is significant. For example, if you are not standing straight, the inseam measurement may not come out accurate.

Similarly, measuring inseam while wearing high heels can impact your inseam measurement by a few inches.

Thus, the third method is highly applicable. The reason being, when you measure inseam length based on an existing pair of pants or jeans, it may interrupt the fitting of the jeans that you desire to purchase. Because manufacturers often remain creative when it comes to their latest collection. Thus, inseam measurement to your denim jeans may not correspond perfectly to the jeans with a piece of different fabric like Linen or Jersey.

Method 3: How to measure inseam length at home alone?

To begin with, this method is quite ideal when you do not have a fine-fitting pair of jeans or trousers. Or if you are trying out an entirely different style of pants for the first time. You can try out the following method:

  • Wear underwear or fine-fitting shorts.
  • Stand in front of the mirror.
  • Pull out one of your legs in a slant position.
  • Now, take the measurement tape.
  • Place the zero-end of the measurement tape at the crotch end.
  • Roll the tape down.
  • Bend down and affix the other end of the tape to the ankle.
  • Make sure that your knee is not bent.
  • Note the measurement.

Although the above-mentioned method is tricky, however, it gives you the edge to purchase any bottom wear like slacks, jeans, and trousers solely based on your body’s actual inseam length. As a consequence, the bottom wear that you order will barely give you an unfitting look, unlike the other cases.

How to measure inseam length for men?

To begin with, men often remain confused while measuring inseam. It is because, among men, there’s a small misconception that goes around. For example, men’s inseam is measured from the waist to the bottom (ankle). But, if any man purchases a pants or trousers online based on this misconception, he will receive an oversized trouser. Indeed, the length from waist to ankle is known as outseam. Here are easy methods to measure inseam length for men.

  • To begin with, fold your pants vertically (one time). This way, both leg-sides will be singled.
  • Line up the pants on a straight surface like a table or an iron chair.
  • Now, lift the one-side leg of jeans up to the crotch.
  • Further, take a measuring tape.
  • Affix it using a thumb on the crotch end (i.e.., where the zipper ends)
  • Run it down to the ankle or bottom of the pants.
  • Note the inseam length (for example, 94 cms. Meaning, 37 inches).

Note: You can also try out this method for kids.

How to measure inseam for shorts?

Have you ever come across a jiff where your shorts are just too elfin to fit your crotch perfectly? Well! In that case, it is possible that you have purchased the shorts with the wrong inseam length. Uneven or inaccurate inseam length can affect your body posture. It may interrupt you while walking, running, and performing other activities like Yoga, Gym, and sleeping.

Source: The Essential Man
  • Wear fine-fitting shorts.
  • Stand in front of the mirror.
  • Pull out one of your legs in a slant position.
  • Now, take the measurement tape.
  • Place the zero-end of the measurement tape at the crotch end.
  • Roll the tape down.
  • Bend down and affix the other end of the tape to the short’s end.
  • Make sure that your knee is not bent.
  • Note the measurement.

What is the normal inseam for men’s shorts? As per the standard clothing measurements, the normal inseam length for men’s shorts lies between 7 inches to 9 inches.

How to measure inseam length on the body by height?

Presuming that you do not have time to measure inseam practically, you can simply get an approximate measurement by your height. For example, if you are 5’5” tall, your approximate inseam will be 26 inches. Similarly, if you are between 5 feet and 6 inches or 7 inches tall, you will need to purchase 27 inches inseam. In the same way, you can calculate inseam by increasing 1-inch inseam up with every 2-inches increment in height. For example, if 5’7” tall individual’s inseam is 27 inches. Therefore, the 5’9’’ tall individual’s approximate inseam will be 28 inches.

How to measure inseams for bike trips?

When you take a bike trip, you often want to purchase shorts, trousers, or lowers with a loose inseam for comfort reasons. Apart from this, during bike trips, you also need to adjust your back again and again. Then, if your inseam measurement is not perfect, it will interrupt your performance. Hence, you can follow up the guide given below while purchasing shorts or lowers for sports purposes like biking or cycling.

  • Take a short or trouser that fits you a little loose. Otherwise, you can also simply measure inseam in underwear.
  • Position yourself against a straight wall. Keep your body posture straight.
  • Station your feet at least eight inches apart.
  • Take a book and place it horizontally between your legs.
  • Now, pull the book until it touches your crotch. Keep spreading legs as you pull the book up to the crotch.
  • Ask your friend to measure the inseam using a measuring tape.

Bikers prefer to purchase bottom wear with an inseam longer than accurate. The reason being, when you place yourself on a bike, the seat requires you to spread your legs on the sides. Thus, a normal inseam will pull the pants up, i.e.., leaving your ankles naked. Thus, check twice before you make the purchase online.

For more information, you can contact us and make advanced choices in life.